- Home
- TOTO WC FRAMES
TOTO WC FRAMES
A TOTO WC Frame designed for WASHLET includes the empty conduit needed to route the seat’s water supply cleanly through the installation. Pair the frame with the matching Auto Flush Motor and push plate when you want hands-free flushing.
Ceramic cistern RP
TOTO WC Frame with empty conduit for WASHLET water supply
Concealed Cistern
Choosing a TOTO frame or cistern
Every TOTO WC needs a flush source matched to the pan. The WC frame is for wall-hung pans. The concealed cistern is for the floor-standing back-to-wall pan. The ceramic cistern sits on the close-coupled pan. The frame and concealed cistern are both prepared for the TOTO auto flush motor.
| Product | For | Size (W × D × H) | Weight | Material | Flush preset | Auto flush motor |
|---|---|---|---|---|---|---|
| TOTO WC frame (WH183ET) | Wall-hung GP, RP, SP and NEOREST WX1 pans | 500 × 120 × 1,120 mm | 15.7 kg | Steel, resin | 3/4.5 litres | Prepared for HM184 |
| concealed cistern (WH183ETNF) | RP back-to-wall pan (CW563Y#XW) | 407 × 115 × 484 mm | 5 kg | Plastic | 3/5 litres | Prepared for HM184 |
| ceramic cistern (SW561DY#W) | RP close-coupled pan (CW561Y#XW) | 411 × 161 × 398 mm | 18 kg | Ceramic, plastic | 3/4.5 litres | Not listed |
Key features
Using the official frame is the most reliable way to achieve the integrated, cable-free look shown in TOTO planning data.
Auto Functions
Sensor-based lid, flush and lighting that operate without touching buttons or handles.Water-Saving Flush
Efficient dual-flush technology with a full flush as low as 4.5 litres.TOTO WC frame (WH183ET)
The frame has an empty conduit that takes the WASHLET water supply behind the wall to the pan, so no hose is visible. Its legs adjust from 0 to 200 mm, the water inlet is R1/2 at the top, and the pan bolts are 180 mm apart at 320 mm above the finished floor, with the outlet centred at 220 mm. Each WASHLET connects through the SP10695UN connecting set; NEOREST WX1 uses the HM183 connecting set. The frame takes the MB175M push plates, or MB177EM plates for NEOREST WX1. Full dimensions are on the WH183ET fact sheet (PDF).
Back-to-wall and close-coupled pans
The RP back-to-wall pan (CW563Y#XW) measures 380 × 640 × 410 mm and weighs 36 kg. It is flushed by the concealed cistern (WH183ETNF), which takes MB175M push plates; TOTO lists it with the TCA564 connecting set for a WASHLET RW, and with the HM184 auto flush motor for RW auto flush. See the WH183ETNF fact sheet (PDF).
The RP close-coupled pan (CW561Y#XW) measures 380 × 700 × 438 mm and weighs 41 kg. The ceramic cistern (SW561DY#W) sits on top, fed from the rear, and is listed for this pan only. With the TCA567 connecting set, the pan takes a WASHLET RG with hidden connections. See the SW561DY#W fact sheet (PDF).
Planning the installation
A WASHLET needs a cold-water supply and a power supply behind the pan. TOTO’s References for preparation of the connections (PDF) sets out where both must come out so that they pass through the openings in the ceramic: a 3/8-inch male stop valve for the 460 mm hose, and a 400 mm power cord fitted with the Hirschmann connector supplied, protected by a 30 mA residual current device that disconnects all poles.
Products in this category
TOTO frames and cisterns: questions
Which frame or cistern do I need?
It depends on the pan. Wall-hung GP, RP, SP and NEOREST WX1 pans go on the TOTO WC frame (WH183ET). The RP back-to-wall pan (CW563Y#XW) uses the concealed cistern (WH183ETNF) behind a wall or duct. The RP close-coupled pan (CW561Y#XW) takes the ceramic cistern (SW561DY#W) on top.
Can I use a TOTO WASHLET with a Geberit frame?
TOTO’s References for preparation of the connections (PDF) describes preparing the WASHLET water supply on a Geberit frame with a Sigma 12 cm concealed cistern and an empty conduit, using the SP10695UN connecting set. Automatic flushing is listed only with TOTO’s own frame and concealed cistern. Send us your frame’s model number and we will check it before you order.
Is the WH183ET frame WRAS approved?
Yes. TOTO lists the WH183ET, the UK version of its WC frame, as WRAS approved.
Which TOTO cisterns work with automatic flushing?
The HM184 auto flush motor is listed for the WH183ET frame and the WH183ETNF concealed cistern, together with a WASHLET in its auto flush version. TOTO does not list it for the SW561DY ceramic cistern.
Can a close-coupled RP pan be connected to an existing angle valve?
Yes. The CW561Y#XW pan has an opening on both sides for an external angle valve, and TOTO offers a cistern connecting set for this, HM561UK with a G1/2 thread. Contact us if you need one.
Need help choosing?
Call us on 0113 35 775 15 and we can check pan, frame and power requirements before you order.
Specifications from TOTO Europe: the WASHLET technical details and functions overviews, the connection guide, product fact sheets and the TOTO UK price list.



